Clann throwing axes

Anything that comes to mind. Members should use the TdB Member forums for official or private business. Forums in this area are readable by anonymous visitors, and registered users can post here.
Forum rules
Use this forum to discuss topics of history or craft as related to our hobby.
As this is a PUBLIC forum, be discrete! Private matters should be discussed in the TdB Member forums!
Any post which is deemed too sensitive for public consumption may be moved to the Private Discussions forum by Moderators.
User avatar
Comyn
Posts: 967
Joined: Mon Jan 02, 2017 9:22 am
Class: Aurrad (Member)

Clann throwing axes

Post by Comyn »

When Brogan dropped off the trailer and helped put some of the metal stuff away in the garage he also gave me the Clann axes. There are six of these and they were in a terrible condition, completely covered in rust.

All of the axes have 19" handles (one seems to be a bit longer). Four of the axe handles have duct tape wrapped along their length, probably because the wood split and we didn't have spare handles. Several of them have wood screws driven into the eye to make the axe head fast.

Since it was going to be a project to remove the axe heads due to the duct tape, and we're going to have to replace the handles anyway, I decided to just dunk them head first into a vinegar bath as is. This stains the handle where it attaches to the axe head so its not the preferred method. After 12 hours I took them out and wiped them down with a cloth, then quickly oiled them with flax seed oil so they don't just immediately rust up again.

They look great - down to bare metal. Some of them need their bit sharpened (one is really bad and needs to be re-shaped) but if the Clann allocates funds for new handles (or if Brogan has handles which I think I remember him saying he did) we can get them looking new again in short order.
Clann throwing axes
Clann throwing axes